How to tell if you have asbestos floor tiles

asbestos floor tiles water damage

Asbestos is a material hazardous to cause cancer. This equipment was banned in 1970, but homes built before this date may still have asbestos floor tiles. You should hire professionals to do tests to detect and remove asbestos, as it is a highly dangerous substance, especially when you have a powder that can be inhaled through the lungs. If you suspect that there are asbestos floor tiles in your home, look for these warning signs and then contact a professional to do testing and a specialized company to take it away from home.

Instructions

  1. Take into consideration the age of your house. If it was built between 1900 and 1970, you may have tile asbestos. It is likely to be found in insulation materials in the tile roof and floors. Houses built between 1930 and 1950 have the highest risk of containing asbestos.
  2. Look for signs of wear on the tiles. The tiles in good condition at low risk of asbestos contamination, but if you notice tiles that are broken and emit a substance with the consistency of dust, call a professional to remove them immediately.
  3. Take into consideration the size of the tiles and misdeals. The asbestos floor tiles used measure 9 by 9 inches. If you notice that your tiles are that size, you should suspect that contain asbestos.
  4. Contact a place to conduct tests and take a sample of the material chemically to discern whether or not it is asbestos. The only way to confirm if a Material is really Asbestos floor tiles; is a test. Although you can find warning signs, you can only be sure with a laboratory test.

Thanks for your visit my site and reading our post about asbestos floor tiles. And we invite you to look at our 12 tip asbestos floor tiles in the photo gallery. Bound to find many ideas to adapt to yours.

As put linoleum tiles in the bathroom wall

linoleum tiles vintage

The linoleum tiles peel and place are made ​​for floors, but you can cover the walls of a bathroom with them. This one so easy and inexpensive to decorate a wall and you can do in an afternoon. You will need a little preparation, given that usually walls are not as smooth and solid as the floor. Avoid applying these tiles on a wall that has many waves or ridges that cannot straighten. Also avoid the shower area or areas where they receive direct water.

Instructions

Placing linoleum tiles in the bathroom wall.

  1. Start with a clean, flat wall without obstruction or roughness. Remove the plates from electrical outlets and switches. Scrape the surface with a spatula to smooth it out and use the plaster to patch holes or depressions. Then, cover the entire surface lightly with paint latex spray to seal and provide a surface for adhering the linoleum.
  2. With your tape measure, level and pencil wall divided into 4 equal squares, drawing two perpendicular lines, one vertical and one horizontal.
  3. Work of a square at a time; off and the first linoleum tile placed at the intersection of the two lines and extending along the edge. Place the other linoleum tiles in place, taking the example of the first and following the guidelines. Be sure to press firmly and evenly. Placed so as to enter the wall.
  4. For parts of the edge, measuring the size of the part to locate, move the part to a tile and cut with a knife, along the level to achieve a straight line.

5. For electrical plugs, check the plug position in the upper and lateral part of the space; uses the same extent the linoleum tiles to cut a rectangular opening with the knife and level. (This should be slightly larger than the socket and smaller than the plate itself). For difficult cuts around the facilities, use a sheet of paper, then moves the part to the tile and cut freehand with a razor.

Techniques Painting for Giani Countertop Paint

giani countertop paint youtube

Giani countertop paint – In relation to renewing the surfaces laminated kitchen, the paint is preferred during the lacquer. Paint giani countertop to resurface your kitchen is fantastic for the project yourself. With paint, you could choose any color you wish. You may also simulate the design of marble and stone with paint. The project generally takes several days, however the results are good for it.

If you are looking for a new giani countertop, but your budget does not allow, there is no better time to learn painting techniques of giani countertop paint especially for this part. If you are a beginner, do not worry. With some basic materials (which can be found at building supply stores), you can have a new countertop in a weekend.

Directions

  1. Apply painter’s tape around the entire edge of the piece (and walls) where you do not want the paint range.
  2. Sand your bench. This will allow better paint adhesion. Clean any dust created by sanding.
  3. Apply two coats of paint with the foam roller. To the edges and more detailed areas, use a good quality brush. Between each coat, let the paint dry for an hour.
  4. Use a sponge to apply (by tapping) to oil paint (a light color). Let this coat to dry for two hours.
  5. With a clean sponge, apply another layer of a different color, oil paint. Let two hours, at least for drying.
  6. Again, apply another color of ink. For the final coat, allow a total of four hours of drying.
  7. Apply four coats of polyurethane varnish. The product is best applied if you use a tow. Lightly sand the bench after layer has dried. Between each coat of polyurethane leave at least two hours for drying.

We invite you to look at our 12 steps giani countertop paint in the photo gallery. Bound to find many ideas to adapt to yours.